| Overview | ||
| Features | ||
| Installing | ||
| Running | ||
| User Interfaces | ||
| Status | ||
| Bluetooth Connection | ||
| Remote Device Configuration | ||
| Toolbox | ||
| Terminal Settings | ||
| Bluetooth Management | ||
| Bluetooth Configuration | ||
|
The user can easily write AT Commands to terminal which configure the Bluetooth adapter of the local device
in the 'Bluetooth Configuration' dialog. Carriage return and line feed are attached to all the AT commands.
To see which AT command is written to terminal, the user needs to enable the
'Local Echo' property in the 'Terminal Settings' dialog. The user can change the device name, enable/disable the response message like 'OK', 'ERROR', 'CONNECT' and 'DISCONNECT', enable/disable to change the terminal mode from 'DATA' to 'COMMAND' and set escape sequence character. The user can configure the intercharacter timeout, specify the last connected device and change the Bluetooth operation mode. The 'Bluetooth Configuration' dialog has two tabs like
|
||
 |
||
| Status | ||
| Configuration | ||
| AT Commands List | ||
| Help | ||
| Exiting | ||