ProBee-ZE20S Firmware Version HAOLv1.12 Release Notes June 19, 2015 Copyright (c) 2011 ~ 2015, Sena Technologies, Inc. INTRODUCTION ============= These release notes describe new features added and bugs fixed since the firmware HAOLv1.11 release. HAOLv1.12 is a variation of PTv1.12 that supports ZigBee HAOL(Home Automation On/Off Light) profile. ENHANCEMENTS ============== + None. BUG FIXES ========= - Fixed the hardware reset bug. KNOWN BUGS =========== * None. REVISION HISTORY ================ HAOLv1.11 June 9, 2014 - Fixed the timer bug. HAOLv1.10 February 14, 2014 + Modified unicast, multicast and broadcast transmission timeout to ATS33 value from 5 seconds. HAOLv1.9 October 31, 2013 + Changed the Ember-stack version to 5.0.1 - Fixed the ATS14 bug. - Fixed the problem that sleepy end device cannot receive multicast messages. HAOLv1.8 August 28, 2013 + Modified to recognizde the Smart Energy Profile ID at AT+DSCAN command. + Modified AT+INFO command output. + Enhanced AT+DEST command to able to input long address. + Removed AT+KEYS command. - Fixed to recognize count of digits in AT command input parameter automatically. - Fixed to cope with some network errors. - Fixed the problem that Radio TxPower is always set to low. HAOLv1.6 April 15, 2013 + Initial Release CONTACTS ========= Sena Technologies Inc. 210 Yangjae-dong, Seocho-gu Seoul, Korea 137-130 url: http://www.senaindustrial.com email: info@senaindustrial.com phone: +82-2-573-7772 fax: +82-2-573-7710 Technical support: email: support@senaindustrial.com phone: +82-2-576-7362