Parani-MSP1000 Firmware Version 1.2.10 Release Notes November 16, 2016 Copyright (c) 2008, Sena Technologies, Inc. INTRODUCTION ============= These release notes describe new features added and bugs fixed since the firmware V1.2.9 release. ENHANCEMENTS ============== - Changed the length of device-name on Connections page. (20->30) - Changed service-search & spp-connection to work on the same bluetooth module. BUG FIXES ========= - None. KNOWN BUGS =========== - None. REVISION HISTORY ================ v1.2.9 October 1, 2015 - Fixed the problem that PAN0 interface does not go down when PAN service is disabled. - Fixed the problem that the SPPD is shutting down in Connector mode. - Fixed the problem that IP information is displayed incorrectly on the System status page. v1.2.8 May 28, 2014 + Added function to reset IP filtering configurations when eth1 mode is changed. - Fixed the problem that Bluetooth connection is disconnected in using frame buffer. - Fixed the problem that Bluetooth connection is delayed in Custom-Connector mode. - Fixed the problem that Bluetooth data is not transmitted from slave unit to master unit on Serial-hub mode. v1.2.7 December 12, 2011 - Fixed the problem that the network isn't available at factory-default. - Fixed the problem that the unformatted cf card isn't mounted. v1.2.6 September 14, 2001 + Default configuration of Ethernet1 is changed from "Bridged with eth0" to "Disable". + The SSL certification is changed because it has expired. - Fixed the problem that Link-keys are removed after the system is rebooted. - Fixed the problem that the web-server isn't accessable after IP configurations are changed. - Fixed the problem that TCP port is assigned incorrectly when remote bluetooth devices are configured by the device name. - Fixed the problem that the password isn't saved in the system. (using System administration -> Change password) - Fixed the problem that the Root Password isn't changed. (using System administration -> User management) - Fiexd the problem that Bluetooth devices aren't connected after SPP configurations are changed. - Fixed the problem that the value of COD is changed incorrectly when bluetooth devices are connected or disconnected. v1.2.5 December 13, 2010 + Added Confirm password on Add user page + Added bd-address format validation at the specific pin code configuration + Added "User allowed to access" value validation at network service configuration + Upgraded stack version of the bluetooth module (unified_bt2.1_23g) - Fixed the memory leak on the sppd(custom-connector mode) - Fixed the problem that processes(sppd, channel)are teminated when TCP connection is disconnected during bidirection transmission - Fixed the problem that TCP connection isn't established when Bluetooth connection is disconnected more than 30 times - Fixed the memory leak on the web-server(connection-page) - Fixed the problem that web page redirection doesn't work in firefox web browser - Fixed the problem that Port forwarding doesn't work when eth1 operaion mode is disabled. - Fixed the problem that TCP connection isn't disconnected after inactivity timeout. - Fiexd the problem that CLI option is enabled on port configuration page when pairing-mode configuration is "connector" - Fixed the problem that CLI connection isn't disconnected when service-category configuration is changed other option - Fixed the problem that SSL connection isn't established - Fixed the problem that log file size isn't reduced - Fixed the problem that "periodic connection" and "when bluetooth connection is established" configurations aren't applied correctly - Fixed the problem that incorrect log-message is logged when Host name configuration is changed - Fixed the problem that "7-bit data emulation" configuration isn't saved correctly - Fixed the problem that Port logging doesn't work correctly - Fixed the problem that "Reduce the log file size" configuration isn't saved correctly - Fixed the ability to redirect to the login-page when user change one's user-configurations - Fixed the problem that web browser cannot access at server after IP configuraions are changed - Fixed the problem that user-group can access to console using ssh - Fixed the problem that web browser cannot access at server when "Cancel" button is clicked on User management page - Fixed the problem that sppd doesn't work correctly when frame-buffer configuration is enabled v1.2.4 February 9, 2010 + Added the disable-option to the eth1 configuration. - Fixed the problem that the device doesn't transmit the data to valid connections the when a slave isn't connected to the master. v1.2.3 October 19, 2009 + Added the support for nagle algorithm - The tcp_retries2 value is changed from 15 to 9 - The sppd is changed not to use the cache at the scan time. - Fixed the problem that the Connector mode is not operated correctly - Fixed the problem that the number of tcp port is not configured more than 10000 - Fixed the problem that the buffer of bluetooth-module is fulled - Fixed the problem that the specific pin code is not added more than 10 - Fixed the problem that the sppd doesn't check port pairing mode when the bluetooth-connection is accepted v1.2.2 November 3, 2008 + Added the support for Multi pin-code + Added the support for Supervision timeout + Added the support to store and delete Link-key + Added the support for Class of device - Fixed the problem that the Control command didn't operate correctly - Fixed the problem that the SPP didn't operate correctly in serial hub mode - Changed the minimum value of Scan-interval from 30 to 0 v1.2.0 May 6, 2008 + Added the support for Serial Modem Card + Added the support for Repeater + Added the support for Serial hub + Added the support for Vertex + Added the support for Control Command + Added the support for VFAT format + Added the support for RFC 2217 - Telnet Com Port Control Option + Added the ability to select the CF Card in the Base directory of FTP configuration menu - Fixed the kernel panic problem occured when the Parani-MSP1000 transfers many data through bluetooth module - Fixed the problem that the Portlog didn't be displayed in the Web correctly - Fixed the problem that the text of Portlog didn't be cleared - Fixed the problem that the Portlog didn't be logged to cf card - Fixed the problem that the syslogd logs '-- MARK --' to syslog server - Fixed the problem that the Date and Time configuration didn't be setted correctly v1.1.0 January 11, 2008 + Added the support for SMTP + Added the support for Dynamic DNS + Added the support for File Transfer Profile + Added the support for ObjectPUSH profile + Added the ability to add and delete multiple IP filtering rules + Added the ablilty for connecting to the deivces with a specific name + Added the support for port forwarding + Added the ability to display the Bluetooth interface in the Bluetooth connection menu - Fixed the occasional kernel panic problem when the Parani-MSP1000 starts - Fixed the problem with the Serial/IP v1.0.1 September 19, 2007 - Fixed the problem that the status led didn't turn on - Fixed the problem in exporting configuration via Web configration v1.0.0 September 12, 2007 + Initial Release CONTACTS ========= Sena Technologies Inc. 210 Yangjae-dong, Seocho-gu Seoul, Korea 137-130 url: http://www.sena.com email: info@sena.com phone: +82-2-573-7772 fax: +82-2-573-7710 Technical support: email: support@sena.com phone: +82-2-573-5422